带 * 为必填项 关闭
移印免烘烤玻璃油墨
- 品牌:欧莱斯
- 适用对象:金属,玻璃,陶瓷,电镀,五金,不锈钢,铝合金,拉面板,烤漆面,喷漆面,喷塑面,喷粉面
- 单件净重:1公斤
- 着色力:100
- 细度:0.01
- 粘度:1500S
- 流动度≥:100
- 保质期:72
- 型号:MPL
- 用途:各种金属、玻璃、真空电镀、水电镀、电泳、阳极氧化铝、电解板、铝塑板、喷塑、喷粉、静电喷漆面、烤漆面以及各种天花吊顶氧化板、镜面板、覆膜板、辊涂板等制品的丝印及移印
- 英文名:in screen printing and the printing of various kinds of metal, glass, vacuum plating, electroplating, electrophoresis, water anodic alumina, electrolytic plate, aluminum plate, plastic spraying,
- 耐温性:高温玻璃油墨
- 性能:自干玻璃漆
性能:可在玻璃上进行印刷并能牢固附着的油墨。
用途:广泛用于建筑幕墙、汽车玻璃、炉灶烤箱面板等;
英文名:Glass ink
基本信息
1、本产品是采用高级进口丙烯酸树脂和高级颜料经过细制研磨加工组合而成,适用范围:各种金属喷涂面、金属喷漆面.金属表面.金属烤漆面.陶瓷、石材、电镀(含水电镀)、阳极氧化铝表面、静电喷漆面及烤漆面等制品的丝印及移印,不需加固化剂,不需烘烤,即可获得的附着力。
2、产品特性:平光、附着力佳、流平性佳、硬度强、耐酒精、耐冲压、抗刮伤、耐化学品。
3、稀释剂:建议采用本公司配套专用稀释剂开油。
4、固化剂:本产品无需加固化剂,切勿加不配套的固化剂,会影响其效果
5、油墨调配方法:搅拌时先加稀释剂10%左右稀释到印刷适合粘度。
6、干燥时间:恒温表干时间自然挥发5-10分钟,实干时间在24小时以内,48小时后达较佳性能,烤箱80℃烘烤15分钟性能更优。冬天视地区而定。
7、使用期限:一年,过期请弃用,加了其他助剂剩余油墨不可回收。
【油墨使用注意事项】
1、试印确认符合要求后再批量生产。
2、做好被印物的表面清除油脂及杂质工作,以促进附着效果。
3、附着力、硬度、耐酸性、耐酒精性、耐化学品性、抗划伤性、耐磨性等性能的检测,需要完全固化后方可检测。
4、未经允许情况下,不得将本系列油墨与其它类型油墨混用及配色。
5、丝网印刷加适量拉丝膏用本公司特慢干稀释剂更适宜印刷工艺顺畅。
【油墨性能检测结果】
1、3M胶纸粘在画有百格的油墨表面45度角迅速拉起不脱油。
2、纯度99%的酒精500G力在油墨表面来回擦拭100次无脱色。
【油墨使用安全规则】
1、油墨,稀释剂使用及储存时严禁烟火
2、使用时注意施工场所的通风状况良好。
3、尽量避免皮肤直接接触。
4、本品不慎溅入口、鼻、眼、耳内,应用大量水清洗或直接求助医生。
5、对本品过敏者,使用前应涂覆一层皮肤扶肤膏或戴不渗透手套。
6、注意作业车间的湿度,湿度过大会影响附着力,温度高容易堵网。
Brand: but MY product name: one from a dry metal INK Numbers: 6486694
1, the product is produced with advanced import acrylic resin and senior pigment after fine grinding system combination to, suitable scope: all kinds of metal coating surface, metal paint surface. The metal surface. Metal paint surface. Ceramic, stone, electroplating (water cut electroplating), anodic alumina surface, electrostatic spray paint surface and paint surface and so on products of screen and pad printing, not needing curing agent, and does not need to bake, can obtain excellent adhesion.
2, the product characteristics: good, adhesion, classification includs glass flow ping sex good, strong hardness, resistance to alcohol resistance, stamping, resistance to scratch, resistance to chemicals.
3, thinner: this company recommended supporting special thinner, open oil.
4, curing agent: this product need not add curing agent, do not add do not supporting the curing agent, it will affect its effect
5, printing ink allocation methods: first when stirred with thinner 10% dilution to printing for viscosity.
6, dry time: constant temperature dry time table natural volatilize 5-10 minutes, action in time within 24 hours, after 48 hours of the best performance, preheat the oven to 80 ℃ bake 15 minutes more optimal performance. Winter varies from area to area.
7, use period: a year, overdue please cut up, add the other additives surplus ink not recycling.
【 precautions 】 use ink
1, ShiYin confirmed again after meet the requirements of production.
2, ready to print the surface of things clear grease and impurities work to promote adhesion effect.
3 and adhesion, hardness, resistance, resistance to alcoholic acid resistance, chemical resistance character, anti-damage, wear resistance performance testing, all need to solidify rear can test.
4, without their permission, may not use the ink series with other kinds of printing ink mix and match colors.
5, screen printing and an appropriate amount of cream with the company's drawing slow dry thinners is more suitable for printing process smoothly.
【 ink performance test results 】
1, 3 M stuck in the picture has the tape's ink surface 45 degree Angle quickly pull up not to take off oil.
2 and purity, 99% alcohol 500 G force in ink surface wipe 100 times back and forth without decoloring.
【 ink use safety rules 】
1, printing ink, thinner, use and storage are prohibited during the fireworks
2, when using note the construction site of the ventilation in good condition.
3, try to avoid direct contact with the skin.
4, this product he splashed entrance, nose, eyes, ears, and application in large amounts of water cleaning or directly for help doctors.
This article 5, allergy, before the use should be coated a layer of skin and skin creams or wear infiltration gloves.
6, pay attention to the work of the workshop, humidity will influence humidity adhesion, high temperature easy plugging nets.
昆山和必旺贸易有限公司基本信息
昆山和必旺贸易有限公司是一家以油墨生产.印刷耗材贸易.印刷加工为一体的公司。和必旺公司座落在交通便利的昆山市张浦镇,。公司占地面积2000平方米,是一家以研制、生产高品质油墨为实体,同时经营各类相关辅助器材的科工贸整体化大型企业。以ISO9001质量认证体系为基础,以欧美EN-71PART3、日本ST-MARK、美国ASTM检测体系为标准,生产适用于丝印、移印、胶印、喷涂等工艺系列油墨产品,为电子电器、纺织服装、日用制品、文体用品、包装印刷、广告展示、玩具业等国内外众多行业领域的有名品牌运营商提供服务,备受着业界的信赖与推崇。凯贤科技在新时期确立了新的发展战略,提出了“科研先导,人才运营,整合资源,创新经营”的企业经营方略。与国内外先进油墨技术研究机构建立战略合作伙伴关系,在不断提高完善现有产品质量的同时,致力于新产品的研制开发。同时完善企业运营机制,积较吸纳各类人才,建立效率高、和谐、热忱、专注的顾问型服务团队,运用行之有效的营销、管理策略,增强了企业与客户的可持续发展动力与优势。 作为中国丝网印刷行业协的会单位和中国网印及制像协会的成员,和必旺深深感受到自己肩负着推动中国丝网印刷、制像事业走高速健康发展道路的历史使命。和必旺人决心籍着自身综合实力,结合各界有效资源,在:“、承诺”的企业核心价值理念的指引下,坚持耕耘,一直进步着,为创建“行业品牌”而奋进!
员工人数:10-50人 厂房面积: 年营业额:人民币100万元/年-人民币200万元/年
年进口额:人民币100万元/年-人民币200万元/年 年出口额:人民币100万元/年-人民币200万元/年 主要市场:大陆,全球,
客户群:
公司名称:昆山和必旺贸易有限公司
注册资本:人民币30万元/年-人民币50万元/年 公司网址:http://sh123456789.glass.com.cn地区:江苏 苏州 昆山市
网址: http://sh123456789.glass.com.cn