中性耐候密封胶

?

“美氏793A”耐候硅酮密封胶是一种中性固化的密封胶:1)不腐蚀基材;2)固化收缩率低;3)在低温(-45°C)至高温(+150°C)内保持一致弹性;4)柔软抗震,耐变形;5)适合于玻璃,铝材,石材,混凝土,砖瓦,陶瓷,塑料间的非结构性粘结密封.

说明:

1)施工温度在5℃~40℃之间;

2)用两块布法清洁基材;

3)将胶嘴按需要的大小做45°切断;

4)将胶打满接缝处

5)约25分钟结皮.

重要:

1)使用前请做材料相容性测试;

2)不用于结构性装配或表面温度(45°C)以上的材料;

3)不用于渗出油污或溶剂的材料.

注意:

远离儿童!

避免接触眼睛和皮肤!

如有接触,请用水冲洗;仍然不适的请就医检查.

执行标准:GB/T14683-2003

保质期:7个月(

?

“MEISHI793A” Weather proofing silicone sealant is a neutral cure ?silicone sealant:1)Not corrosion to the materials;2)Low shrinkage on curing;3)Keep elastic in low(-45℃) and high(+150℃) temperatures; 4)High grade soft,be able to bear oscillation; 5)Suitable for glass,aluminum ?material,stone,concrete,brick,ceramic,plastic,non-structural sealing.

DIRECTIONS:

1)Construcation applycabie between 5℃~40℃;

2)Substrates should be solvent cleaned using two clothes method;

3)Cut the nozzle to desired opening at 45°angle ;

4)Fill the joint completely;

5)Formation of skin in 25 minutes.

IMPORTANT:

1)Please do material compatibility testing before use；

2)Do not use in structural applications or where surface temperatures exceed 45℃ for materialsafety;

3)Incompatible oozing out oily or solvents.

PRECAUTIONS:

Keep out of the reach of children!

Avoid contact with eyes and skin!

In case of contact,flush with lot water;If still indisposed,consult a doctor.

STANDARS: GB/T14683-2003.

DURABILITY: 7 Months(

?

深圳美氏康宁胶业（MEISHI CORNING）是一家集研制，生产，销售为一体的硅酮密封粘结产品制造商。公司成立于2000年，是一家正在蒸蒸日上，孜孜以求的企业。工厂拥有现代化的厂房，精良的设备，形成了强大的生产能力。能为客户提供从高到低不同品质，各种类型的产品。几年来，公司精心打造了一支的研发队伍，培养了一批熟练的技术工人，形成了一套完整的质量控制和生产管理体系。从原材料进厂到产品输出均经过多层次严格检验，以保证所有产品均符合国家有关部门的相应标准。 Shenzhen Meishi Corning plastic industry (MEISHI CORNING) is a research, production and sales of silicone sealant adhesive manufacturers. Founded in 2000, A thriving business. The factory has a modern plant, Good equipment, Formed a strong production capacity. Able to provide different quality from high to low, all types of products for you. In recent years, the company carefully built an outstanding R & D team to develop a number of skilled workers to form a complete set of quality control and production management system. Products from raw materials to the outputs through multi-level rigorous testing to ensure that all products meet appropriate standards In line with national standards.